•
Up
to Three fan section cabinet choices of either Hermetic,
Scroll or Semi-Hermetic multiple compressors with
maximum Three compressors per fan section.
•
Compressor
sizes available ranging from 1/2 through 6 HP, to a maximum total
of 6HP per fan section and 18 HP per unit. (Based
on 95 °F (35 °C) design Ambient).
•
Semi-hermetic
(2 HP and larger) use suction and discharge vibration eliminators
and spring mounts.
• High
efficiency enhanced tube on both indoor or outdoor condenser
design using high efficiency PSC fan motors.
•
Outdoor unit uses weather-resistant housing with hinged hood,
weatherproof electrical panel and fixed head pressure flooding
valve.
•
Each compressor
includes main power fuse block, contactor, adjustable Dual (low
/ high) pressure control, oil pressure control (where
applicable) and fused control circuit.
•
Single Point
Main electrical panel with defrost timeclock and contactor options
available for air and electric defrost evaporators.(single
point dependant on evaporator voltage).
•
Includes liquid
line drier and sightglass.
Optional
Components (Factory Mounted)
•
Sealed Suction
Filter
•
Suction accumulator*
•
Discharge
line check valve
•
Receiver Inlet ball valve
•
Heated and insulated receiver
•
Flex hoses -for pressure controls
•
Field piping connections at rear (instead at front)
•
Main disconnect switch
•
Main disconnect fusing
•
Voltage /Phase monitor
•
Compressor circuit breaker
•
Compressor anti short cycle time delay relay
•
Current sensing relay -for use with Oil control (where applicable)
•
Sentronic Oil pressure control (where applicable)
•
OMB Oil level Control (where applicable)
•
Air or Electric Defrost Kit
•
Pumpdown toggle switch
•
Liquid Line solenoid valve-with standard 230V coil (shipped loose)
•
Spare condenser circuit for remote ice machine
*
for semi-hermetic compressors - maximum one suction accumulator
per fan section
