 |
|
 |
TLV - Low Velocity Unit Coolers |
|
|
 |
| TLV
AIR DEFROST
Designed
for 35°F rooms and higher, the TLV-AD Low Velocity Unit Cooler
allows for positive low air movement and even temperatures throughout
the refrigerated space, while maintaining desired humidity conditions.
The TLV-AD unit features a cleanable, durable textured aluminum
cabinet, corrosion resistant fasteners, low speed plug-in motor/fan
assemblies and a positive sloped drain pan assembly.
TLV
ELECTRIC DEFROST
The
TLV-ED Electric Defrost Low Velocity Unit Cooler features the same
characteristics as the TLV-AD and can be applied in lower temperature
28°F to 34°F rooms. The electric defrost units also include
corrosion proof incoloy sheathed defrost heaters on the face of
each coil and on individual inner drain pans under each coil allowing
for fast efficient coil defrosting. Defrost heaters are wired to
a factory installed terminal block. The unit also includes a Thermodisc
type fan delay and defrost termination thermostat. |
  |
TLV
HOT GAS DEFROST
The
TLV Hot Gas Defrost Low Velocity Unit Cooler features similar
characteristics as the TLV-AD and can be applied in lower temperature
28°F to 34°F rooms.
The hot gas defrost units include corrosion proof incoloy sheathed
heaters on individual drain pan assemblies preventing re-freezing
of condensate water during defrost cycles.
Factory installed side outlet distributor and Thermosdisc type
fan delay thermostats are standard.
Check valves are supplied loose for TX valve by-pass.
Units are suitable for reverse cycle, three pipe or Thermosaver™
hot gas defrost applications.
Features / Options:
• Air, electric and hot gas defrost models for 28°F and
above room temperatures
• Available in 10 sizes from 6,000 BTUH to 37,000 BTUH at 10°F
TD
• Optional fin materials and coatings, energy efficient PSC
motors, and painted cabinet
available.
• R134a, R22, R404A, R507
• 115/1/60, 208-230/1/60, 100/1/50 and 200-220/1/50
|
|
