Skip to Navigation
Products Banner

TEH - Indoor/Outdoor Air Cooled Hermetic Condensing Units

Models range in capacity from ½ HP to 7 ½ HP for high/medium, extended medium and low temperature applications.  

Models are available with Copeland, Tecumseh or Maneurop compressors and many standard features all built into a spacious serviceable design. In addition, nine factory-installed option packages have been pre-selected for your convenience plus the EH unit offers the flexibility to create your own package.

c ul us

Indoor Unit:

• Weatherproof electrical control box with compressor contactor and fused control circuit

• Welded hermetic compressor

• High efficiency enhanced tube and fin condenser design

• Pre-formed piping

• Quiet fan motor operation

• Energy efficient PSC condenser fan motor

• Electrical control panel away from air flow stream

• Wide-open front design, spring latches and handle on 5HP MT & HT or larger

• Unit leak tested and shipped with helium holding charge

• Receiver with fusible plug and liquid shut off valve

• Suction service valve

• Copper tubing secured with cushion clamps

• Fixed high and low pressure control

 

Outdoor Unit: All Standard Features of Indoor Unit, Plus:

• Outdoor weather-resistant housing with removable hood

• Flooded head pressure control (non adjustable) 

• Crankcase heater

Nine pre-selected factory-installed option packages available 

Optional Features (Factory Mounted): 

• Variable speed EC motors as head pressure control (replaces flooded valve)

• Sealed suction filter

• Suction accumulator

• Suction accumulator with boil-out coil

• Heated and insulated receiver

• Sealed liquid line filter drier and sight glass

• Liquid line solenoid valve with 230-volt coil (shipped loose)

• Compressor circuit breaker

• Compressor time delay relay

• Adjustable low pressure control with flex hose

• Pump down toggle switch

• Electric defrost kit with mechanical time clock and contactors, as required

• Hoffman variable fan speed control

• Lockout control circuit relay (for liquid solenoid valve)

• Disconnect switch (fused or non-fused)

• 3 Lead electronic phase / voltage monitor

• Leg kit or air discharge hood

  • High/Medium, Extended Medium and Low Temperature Refrigeration applications.
  • Indoor or Outdoor
  • ½ HP to 7 ½ HP for high/medium, extended medium and low temperature applications.
  • 115/1/60
  • 208-230/1/60
  • 208-230/3/60
  • 460/3/60
  • 575/3/60
  • 220/1/50
  • 200-220/3/50  
  • 380-400/3/50